How to update a version 2.0.0 HLX to version 2.0.1

1. Use the menu to navigate to Firmware Update.
2. Select HLX_V201.HFF file.
3. The expansion cards are updated and the system reboots to update the system
   card.
4. The HLX reboots and the update is complete. See below for the correct firmware versions to
   check in the menu.


How to update a version 1.3.0 HLX to version 2.0.1:

1. Unplug power.
2. Hold in the knob while powering up.
3. Select HLXBLREP.HFF file as the firmware file.
4. Once it has updated, unplug the unit.
5. Plug the unit back in, and do NOT hold in the knob.
6. Wait for the BLREP to load; select HLXBL200.BL file. Wait for the update to finish.
7. Unplug power.
8. Plug power back in while holding in the knob.
9. Select HLX_V201.HFF file. Wait for the firmware update to complete.
10. The unit will reboot. Once the unit has booted, use the menu to navigate to
    firmware update.
11. Select the HLX_V201.HFF file. The expansion cards will be updated, and the system
    card a second time. The unit will reboot when complete.


Confirming 2.0.1 Firmware Update

Only the output cards are at version 2.0.1. You should see the following on the HLX Firmware Versions screen after updating to v. 2.0.1:

Firmware: 2.0.0
Bootloader: 2.0.0
EC1: 2.0.0, 1.0.0 (input cards)
EC2: 2.0.1 (output cards)
...


